Skip to main content

Shoulder

Anatomic Versus Reverse Shoulder Replacement: Which Is Used and Why

The difference between anatomic and reverse shoulder replacement, and the factors that decide which one suits a particular shoulder.

Dr Chris Conyard

Medically reviewed by Dr Chris Conyard

Upper Limb Orthopaedic Surgeon · Woolloongabba, Brisbane

Published 8 October 2026 · Reviewed 7 October 2026

The short answer

An anatomic total shoulder replacement recreates normal anatomy and needs a working rotator cuff. A reverse replacement swaps the ball and socket around so the deltoid can lift the arm instead, which is why it is used when the cuff is torn beyond repair. The state of the cuff is usually the deciding factor.

The anatomic total shoulder replacement

This resurfaces the joint as it is built. A metal ball replaces the head of the arm bone and a plastic socket replaces the worn glenoid. The mechanics stay normal, so the rotator cuff still has to do its job of centring the ball while the deltoid lifts the arm.

It suits the shoulder with:

  • Osteoarthritis with intact, functioning rotator cuff tendons
  • Reasonable bone stock in the socket
  • Pain as the dominant problem rather than weakness

Results for pain relief in this group are well established in the published literature.

The reverse total shoulder replacement

Here the ball is fixed to the shoulder blade and the socket to the arm bone. Moving the centre of rotation changes the leverage of the deltoid so that the deltoid alone can raise the arm. That is the key point: it produces a shoulder that works without a rotator cuff.

It is used for:

  • Cuff tear arthropathy, meaning arthritis combined with an irreparable cuff tear
  • Large irreparable cuff tears causing an inability to lift the arm
  • Some complex fractures of the upper arm bone, particularly in older patients
  • Revision of a failed previous replacement

The factors that actually decide

FactorPoints toward anatomicPoints toward reverse
Rotator cuffIntact and functioningTorn beyond repair
Main complaintPain with preserved movementCannot lift the arm
Glenoid boneReasonably preservedSignificant wear or deficiency
Previous surgeryNone or minorFailed prior replacement

Age is a consideration but is not the deciding factor on its own. A younger patient with an irreparable cuff tear may still be better served by a reverse design, and an older patient with a healthy cuff may do very well with an anatomic one.

What each feels like afterwards

Anatomic replacements generally restore more natural rotation, which matters for reaching behind the back and for dressing. Reverse replacements reliably restore forward elevation but rotation behind the back improves less consistently. Both usually give substantial pain relief, which for most people is the primary goal.

Longevity and precautions

The goal of shoulder replacement using modern implants is to last the entire life of the patient. Longevity depends on activity level and the type of implant used. Lifting restrictions are usually recommended long term, more strictly after a reverse replacement, because repeated heavy loading shortens implant life. Contact sport and heavy overhead manual work are generally discouraged after either.

Frequently asked questions

Why is it called a reverse replacement?
Because the normal anatomy is swapped. The ball is fixed to the socket side and the cup is fixed to the arm bone. This changes the mechanics so the deltoid muscle can lift the arm even when the rotator cuff no longer works, which is the whole reason the design exists.
Can I lift overhead after a reverse replacement?
Most people regain useful overhead reach, though the range is often not quite that of a healthy shoulder. Rotation behind the back tends to improve less predictably than forward elevation. Lifting limits are usually advised long term to protect the implant.
Which one lasts longer?
Anatomic replacements have the longer published track record, and reverse designs have improved substantially as they have matured. The goal of shoulder replacement using modern implants is to last the entire life of the patient. Longevity depends on activity level and the type of implant used. Implant choice is driven mainly by whether the rotator cuff works, not by longevity alone.

Disclaimer: this article is general information only and is not medical advice. Implant selection is an individual decision made after examination and imaging. Individual results vary. Please discuss your own shoulder with an orthopaedic surgeon.

Any surgical or invasive procedure carries risks. Before proceeding, you should seek a second opinion from an appropriately qualified health practitioner.

Ready to discuss your options?

Whether you're a patient seeking treatment, a GP looking to refer, or a case manager arranging an assessment, we're here to help.

Call
Book / Refer