Skip to main content

Shoulder

Partial Versus Full Thickness Rotator Cuff Tears: What the Difference Means

How partial and full thickness rotator cuff tears differ, why the distinction changes treatment, and what each usually means for recovery.

Dr Chris Conyard

Medically reviewed by Dr Chris Conyard

Upper Limb Orthopaedic Surgeon · Woolloongabba, Brisbane

Published 8 October 2026 · Reviewed 7 October 2026

The short answer

A partial thickness tear involves part of the depth of the tendon, so some fibres remain attached to bone. A full thickness tear goes all the way through, creating a hole between the joint and the space above it. Full thickness tears are more likely to enlarge over time and are more often considered for repair.

Thinking about it as rope

It helps to picture the tendon as a rope attached to the bone. A partial tear is fraying through some of the strands. A full thickness tear means the strands have parted the whole way through at some point along the width. Even in a full thickness tear, the rest of the tendon can still be attached, which is why many people retain reasonable strength.

Partial thickness tears

These are classified by where they sit within the tendon:

  • Articular sided, on the joint surface. These are the most common and are more prone to progression than the other types.
  • Bursal sided, on the outer surface facing the overlying bursa. These are often disproportionately painful.
  • Intrasubstance, contained within the tendon itself and not reaching either surface.

Depth matters. Tears involving less than half the tendon thickness are usually managed without surgery in the first instance. Deeper partial tears behave more like full thickness tears and are considered differently.

Full thickness tears

Here the question shifts from whether the tendon is damaged to how much tendon is involved, what condition it is in and whether the muscle has begun to change. Three factors carry most weight when considering repair:

  1. Tear size and how far the tendon has retracted from its attachment
  2. Tendon quality, since a thin degenerate tendon holds stitches less reliably
  3. Muscle condition, particularly fatty change within the muscle belly, which does not reverse once established

This is why two people with the same words on a scan report can be given very different advice. Dr Conyard uses the Rotator Cuff Healing Index (RoHI), a published score that combines several of these factors with age, bone density and type of work, to estimate the likelihood of a repair healing. You can see how it is worked out on the rotator cuff repair page.

Does the distinction change treatment

Often, yes.

Partial tears, especially shallower ones, usually begin with a structured rehabilitation programme, activity modification and sometimes an injection to allow rehabilitation to proceed. Surgery is considered when a genuine programme has been completed without adequate improvement.

Full thickness tears are considered for repair more readily, particularly when the tear was sudden and traumatic, when there is meaningful weakness, and when tendon and muscle remain in good condition. Degenerative full thickness tears in people who are comfortable and functioning well can still reasonably be managed without surgery.

What a scan report will not tell you

Imaging findings are common in people with no symptoms at all, and the frequency rises with age. A tear on a scan is not automatically the cause of the pain. The finding has to fit the history and the examination before it explains anything.

Frequently asked questions

Is a partial tear less serious than a full tear?
Generally yes in structural terms, but not always in symptom terms. Partial tears can be just as painful as full thickness tears, sometimes more so. The distinction matters most for predicting how the tear will behave over time and for deciding whether repair is likely to help.
Can a partial tear become a full tear?
It can. Published series report that a proportion of partial thickness tears progress, particularly those on the joint side of the tendon and those in people who continue heavy overhead loading. Progression is not inevitable and many partial tears remain stable for years.
How is the difference diagnosed?
Ultrasound and MRI can both distinguish partial from full thickness tearing, with MRI generally giving more information about tear depth, tendon quality and muscle condition. Examination findings, particularly the pattern of weakness, also contribute to the picture.

Reference: Kwon J, Kim SH, Lee YH, Kim TI, Oh JH. The Rotator Cuff Healing Index: a new scoring system to predict rotator cuff healing after surgical repair. Am J Sports Med. 2019;47(1):173-180.

Disclaimer: this article is general information only and is not medical advice. It cannot account for your individual imaging or examination findings. Individual results vary. Please discuss your own scan and symptoms with your treating doctor.

Any surgical or invasive procedure carries risks. Before proceeding, you should seek a second opinion from an appropriately qualified health practitioner.

Ready to discuss your options?

Whether you're a patient seeking treatment, a GP looking to refer, or a case manager arranging an assessment, we're here to help.

Call
Book / Refer